NavTalk NMEA Spliter
Acoustic Beacon
Acoustic Beacon Tester
AIS Solutions
Anemometer
BNWAS
Counter Piracy Solutions
Course Recorder
EPIRB
GPS Navigator
Gyrocompass Retransmission
Heading Repeaters
Hull Stress Monitoring System
Interfacing Solutions
Loading Computer
NMEA Buffer
NMEA Tester
SMIDS
Speed Log
SSAS
VDR / S-VDR
Vessel Management System
Offshore Electronics
NavTalk NMEA Spliter
Product Description
The NAVTALK acts as a selector, taking input from one of two nav-aids (Or the gyro) and provides 10 OUTPUTS for all manner of equipment.
You may find 3 Navtalks on some ships to ease the interfacing and integration of the ship’s navaids.
- GPS data for bridge equipment.
- GPS data from Inmarsat C to equipment in the
- GMDSS console
- Gyro heading data to bridge equipment.
| Input | 2 Channel input NMEA 0183, V1 or V2, RS232 or RS422 format all rates up to 4800 baud data. |
| Output | NMEA 0183 RS422 5v level differential drive PLUS RS232 compatible 0-5v level. 5 mA maximum per line, limited with 47 ohm series resistors from 5v CMOS Three of 10 outputs have common 0v, isolated from other signals. |
| Features | 3 of the 10 outputs electrically isolated Helps terminate screens correctly. Economical junction box for a neat installation of many cables. RS232 compatible output as well as NMEA 0183 and RS422. LEDS on pcb to indicate power, channel in use, data input & output. “Alarm” output indicating which channel selected. |
| Power | 10 to 32 v DC at less than 0.1 amp. |
| Enclosure | ABS splash proof housing 160 x 240 x 60 mm. |
