KW 903-SX – Synchro Retransmission Unit – Lower Power 0183
Acoustic Beacon
Acoustic Beacon Tester
AIS Solutions
Anemometer
BNWAS
Counter Piracy Solutions
Course Recorder
EPIRB
GPS Navigator
Gyrocompass Retransmission
Heading Repeaters
Hull Stress Monitoring System
Interfacing Solutions
Loading Computer
NMEA Buffer
NMEA Tester
SMIDS
Speed Log
SSAS
VDR / S-VDR
Vessel Management System
Offshore Electronics
KW 903-SX – Synchro Retransmission Unit – Lower Power 0183
The KW 903-SX converts gyro heading data into a 1:1, 36:1, 90:1 or 360:1 synchro output. (Amongst others.)
It is used in retrofits on systems with the non-standard ratio. The power out is less than the SP version above, so it can only drive 1 to 4 repeaters. It can also be used on the standard 360:1 ratio, where it gives exceptionally smooth rotation.
The SX is used to drive 500 Hz AMUR repeaters.
A built in test facility allows progress to be monitored at each stage of the installation.
NOTE: A very low power version of this, the KW960 is also available for special applications.
Input
- NMEA 0183.
Outputs
- Synchro signals 25VA 50/60 Hz or 400 Hz. Signals adjustable 0 to 45 volts. Standard reference out 50/100v.
Power
- Nominal 110/220 Volt 50/60Hz
Dimensions
- 500mm x 400mm x 150mm ventilated steel enclosure
Mounting
- Bulkhead
Note :
For 400 Hz use an external source is required. Ratio is set in the EPROM in the factory.
