KW 941 – NMEA Stepper Retransmission Unit
KW 941 – NMEA Stepper Retransmission Unit
The KW941 interface converts serial heading data into traditional step transmission, and also acts as a stepper amplifier.
Inputs
- Standard stepper 6 steps per degree. 3 to 70 volts + or – ve common.
Inputs
- NMEA 0183. $HEHDT, $GPHDT and all valid heading sentences
or Furuno AD10 format serial data and clock. (DIP switch selectable)
Outputs
- Stepper, 6 steps per degree. 6 output ports. Output voltage nominal 24, 35, 50 and 70 volts DC (1A per port). Negative step voltage, positive common. The model KW941-BP outputs either polarity.
- Please specify your voltage requirements when ordering.
Outputs
- $HEHDT output, following the NMEA 0183 or Furuno input only.
Outputs
- Alarm relay.
- 1 Amp DIL relay.
- Connectors:Lift off terminal blocks. Power is orange snap-in connector.
Power
- 115/230 volts 50/60 Hz. Double fused, switched and filtered.
Housing
- Enclosure with door 350 x 250 x 150 mm.
Features
- LEDs on all inputs and outputs. Simple design. Watchdog restart circuit. All connections removable terminal blocks.
