Professional VDR/SVDR Annual Performance Test
AMI Maritime provides VDR and S-VDR annual performance testing support for commercial vessels in Singapore. We check recorder operation, connected sensors, recorded data, backup power and protective capsules in line with applicable testing requirements.
As the Far East Regional Centre of AMI Marine (UK) Ltd, we specialise in VDR systems and marine data interfacing, supporting shipowners and vessel operators with marine equipment services.
VDR Annual Performance Test Singapore
A Voyage Data Recorder (VDR) records important bridge information, including vessel position, speed, heading, radar data and bridge audio. An Annual Performance Test (APT) checks that the system records and preserves this information correctly.
AMI Maritime supports VDR/S-VDR testing in Singapore for a range of systems, including AMI, Headway, JRC, Sealantem and Totem Plus, subject to model compatibility and applicable authorisation.
What Is a VDR Annual Performance Test?
A VDR Annual Performance Test is a yearly examination of the complete Voyage Data Recorder system, including its connected sensors and recording components.
The test verifies that:
- Required bridge data is being recorded correctly.
- Recorded information meets applicable accuracy and duration requirements.
- Recorded data can be retrieved and reviewed.
- The protective capsule and associated equipment are serviceable.
- The recorder's power supply and backup arrangements function correctly.
- Location aids and other safety-related components are operational.
Following successful testing, the manufacturer or an appropriately authorised testing facility prepares the applicable performance test report and Certificate of Compliance for the vessel's records.
VDR Annual Performance Test Requirements
SOLAS Chapter V, Regulation 18.8 requires VDR systems, including connected sensors, to undergo annual performance testing.
The test verifies:
- Accuracy and duration of recorded data.
- Recovery of recorded information.
- Condition of protective enclosures.
- Functionality of recorder location devices.
Testing must be carried out by the manufacturer or an appropriately authorised facility in accordance with IMO guidelines. Singapore-flagged vessels must also meet MPA facility acceptance requirements.
The Certificate of Compliance must be retained on board the vessel.
Relevant regulations: SOLAS Chapter V, Regulation 18.8; IMO MSC.1/Circ.1222/Rev.1; MPA Shipping Circular No. 9 of 2006.
How Often Is a VDR Performance Test Required?
VDR and S-VDR systems are subject to annual performance testing under SOLAS requirements.
IMO guidelines provide specific timing flexibility around the relevant survey due date:
- Passenger ships: Testing may be carried out up to three months before the due date.
- Cargo ships: Testing may be carried out within three months before or after the due date.
The maximum interval between successive tests is generally 15 months for passenger ships and 18 months for cargo ships, subject to applicable requirements.
The relevant flag administration and vessel requirements should always be checked when scheduling the test.
Difference Between VDR and S-VDR
A Voyage Data Recorder (VDR) and Simplified Voyage Data Recorder (S-VDR) both record important information relating to a vessel's navigation and bridge operations.
The main difference is the amount and type of information each system records.
VDR (Voyage Data Recorder)
A full VDR records a broader range of bridge and vessel information, including navigation data, radar information, audio, alarms and other connected equipment inputs.
S-VDR (Simplified Voyage Data Recorder)
An S-VDR is a simplified recording system designed to meet the applicable SOLAS requirements for certain vessels. It generally has fewer mandatory data inputs than a full VDR.
Both VDR and S-VDR systems require annual performance testing.
Whether a vessel requires a full VDR or S-VDR depends on its ship type, gross tonnage, construction date and applicable SOLAS requirements.
What Is Included in a VDR APT?
The annual performance test examines the recorder and the equipment connected to it. The exact checks depend on the VDR model, installation and applicable performance standards.
Testing may include:
- Recorder operation and functional testing.
- Data recording and playback verification.
- VDR data download and review.
- Connected sensor data verification.
- Bridge audio and microphone testing.
- Alarm and failure indication checks.
- Main and backup power supply inspection.
- Backup battery condition and expiry checks.
- Fixed and float-free capsule inspection, where fitted.
- Acoustic beacon and location aid checks.
- Installation, cabling and connection inspection.
- Review of recording duration and data recovery.
- Test documentation and Certificate of Compliance, where issued by an authorised facility.
VDR Performance Test Checklist
During the VDR annual performance test, the following items are checked in accordance with the applicable manufacturer procedure and IMO performance testing guidelines.
Data Recording
- Connected sensor information is recorded correctly.
- Recorded data can be retrieved and reviewed.
- Date and time information is accurate.
- Required recording duration is maintained.
Bridge Audio
- Bridge microphones are functioning.
- Audio recordings are clear and recoverable.
- Audio channels are checked as applicable.
Alarms and Power Supply
- Recorder alarms and failure indications operate correctly.
- External power failure alarm is checked.
- Reserve power operation is verified.
- Backup battery condition and expiry are checked.
- Automatic shutdown operation is checked where applicable.
Protective Capsule and Location Aids
- Capsule condition is inspected.
- Float-free arrangements are checked where fitted.
- Acoustic beacon functionality is verified.
- Battery and release arrangements are inspected as applicable.
Data Recovery
- Recorded information can be downloaded.
- Playback and data review are completed.
- Recording duration and recoverability are verified.
The final test scope follows the applicable manufacturer's APT procedure and IMO MSC.1/Circ.1222/Rev.1.
How a VDR Annual Test Works
AMI Maritime follows a structured process to coordinate VDR annual performance testing.
- 1. Request a Test: Send us the vessel name, VDR manufacturer, model, port and preferred attendance date.
- 2. Planning and Preparation: We review the available system details, previous test documentation and onboard requirements before confirming attendance arrangements.
- 3. Onboard Inspection and Testing: The recorder, connected sensors, microphones, power supply, alarms and protective capsule are inspected according to the applicable testing procedure.
- 4. Data Verification: Recorded information is downloaded and reviewed to verify recording performance and data recoverability.
- 5. Fault Identification and Rectification: If any faults are identified, we advise the vessel's representative on the required corrective work. Repair or replacement can be arranged where supported. See our Marine Navigation and Communication Equipment Repair service for further assistance.
- 6. Test Report and Documentation: Following successful testing, the applicable report and Certificate of Compliance are completed by the manufacturer or appropriately authorised testing facility, in accordance with relevant requirements.
Documents and Preparation Before the Test
To help minimise delays during onboard attendance, please prepare the following information:
- Previous VDR APT report and Certificate of Compliance.
- VDR manufacturer, model and serial number.
- Vessel name and IMO number.
- Vessel flag and relevant particulars.
- Access to the bridge and VDR installation.
- Access to the protective capsule and associated equipment.
- Details of any known faults, alarms or recording issues.
Providing these details in advance helps plan the attendance and identify any equipment or tools that may be required.
VDR APT for Cargo Ships and Tankers
Commercial vessels fitted with VDR or S-VDR systems must follow the applicable annual performance testing requirements.
These may include:
- Cargo ships.
- Tankers.
- Bulk carriers.
- Container ships.
- Other commercial vessels fitted with VDR or S-VDR systems.
The testing requirements are based on the installed recording system, connected sensors and applicable regulations.
AMI Maritime supports vessel operators in Singapore with VDR/S-VDR testing services, subject to system compatibility and attendance arrangements.
Why Regular VDR Testing Matters
A Voyage Data Recorder provides an important record of bridge operations and vessel movements.
If the recording system develops a fault, critical information may be missing when it is needed for an incident investigation.
Regular VDR performance testing helps identify:
- Faulty or disconnected sensors.
- Recording and data recovery problems.
- Microphone and audio faults.
- Weak or expired backup batteries.
- Recorder alarms and power supply issues.
- Protective capsule and location aid defects.
Completing the required performance test also helps vessels maintain the necessary onboard documentation and prepare for relevant inspections and surveys.
Why Choose AMI Maritime as Your VDR Testing Company in Singapore?
AMI Maritime is based in Singapore, providing marine equipment services and technical support to vessel operators and marine customers across Singapore and the surrounding region.
Connection with AMI Marine (UK) Ltd
We are the Far East Regional Centre of AMI Marine (UK) Ltd, a specialist company working with VDR, S-VDR systems and marine data interfacing.
Specialist VDR Experience
VDR systems and marine data interfacing are core areas of our technical business.
Proven Service Attendance
In 2023, AMI Maritime attended 86 vessels for ChartWorld ECDIS services. ChartWorld recognised our company as its Service Partner with the Strongest Attendance Record.
Multiple Marine Equipment Services
Our team also supports marine navigation and communication equipment servicing, repair and installation, helping customers coordinate multiple technical requirements.
Frequently Asked Questions
What is a VDR annual performance test?
A VDR annual performance test is a yearly examination of a vessel's Voyage Data Recorder and connected sensors. It checks recording accuracy, data duration, recoverability, power supply and protective equipment.
How often is a VDR APT required?
VDR and S-VDR systems require annual performance testing under SOLAS Chapter V, Regulation 18.8. The permitted testing window depends on the vessel type and applicable survey requirements.
Who can carry out a VDR annual performance test?
The test must be conducted by the manufacturer or a person authorised by the manufacturer. The testing facility must also meet the applicable flag administration and classification society requirements.
Do S-VDR systems need an annual performance test?
Yes. Simplified Voyage Data Recorders (S-VDR) are also subject to annual performance testing under the applicable SOLAS requirements and IMO guidelines.
What is checked during a VDR APT?
The test includes recorder operation, connected sensor data, playback and data recovery, alarms, external and reserve power, batteries, acoustic beacon and protective capsule arrangements.