Skip to content
AMI Maritime

Gyrocompass Overhaul and Magnetic Compass Calibration

AMI Maritime provides gyrocompass overhaul, servicing and magnetic compass calibration for commercial vessels in Singapore. We support shipowners, ship managers and vessel operators with marine compass services to help maintain reliable heading information onboard.

Gyrocompass Overhaul Singapore

A gyrocompass provides true heading information to the bridge team. This information can be distributed to bridge equipment such as radar, ECDIS, autopilot and AIS, depending on the vessel's system configuration. Accurate heading data is important for navigation and the operation of connected equipment.

AMI Maritime provides gyrocompass overhaul in Singapore for commercial vessels, supporting the maintenance of master gyrocompasses, gyro repeaters and their interfaces with other bridge equipment.

We are the Far East Regional Centre of AMI Marine (UK) Ltd, a British company specialising in Voyage Data Recorder (VDR) and marine data interfacing. Our experience with marine electronics and bridge systems supports our understanding of how navigation data is shared between onboard equipment.

Gyrocompass Service and Repair for Ships

Regular gyrocompass servicing helps identify equipment faults, worn components and potential performance issues. The service requirements depend on the installed system, its condition and the manufacturer's recommendations.

Gyrocompass service and repair requirements may include:

  • Master gyrocompass inspection and testing
  • Gyrosphere and sensitive element checks
  • Gyro repeater inspection and servicing
  • Heading repeater synchronization
  • Heading accuracy checks and alignment
  • Fault finding on gyro interfaces and signal outputs

For each service requirement, the equipment should be inspected to identify the cause of the problem. Any necessary repair or component replacement should be followed by appropriate testing before the system returns to service.

Annual Gyrocompass Overhaul

Gyrocompass overhaul is an important part of maintaining marine navigation equipment. Service intervals depend on the equipment model, manufacturer's recommendations, operating hours and the condition of the system.

A regular overhaul helps identify worn components, check system operation and maintain reliable heading information.

Depending on the gyrocompass model and required service scope, an overhaul may include:

  • General system inspection and cleaning
  • Inspection of the sensitive element and related components
  • Checking electrical connections
  • Inspection and replacement of worn parts where required
  • Heading accuracy and system performance checks
  • Gyro repeater synchronization checks
  • Operational testing after servicing

Vessel operators should follow the manufacturer's maintenance instructions and applicable maintenance schedules when planning annual gyrocompass overhaul.

Magnetic Compass Calibration Singapore

The magnetic compass is an important navigation instrument onboard a vessel. It provides directional information and can serve as an independent heading reference when electrical navigation equipment is unavailable.

The vessel's structure, magnetic materials and nearby electrical equipment can affect the compass reading. This difference between the indicated direction and the expected magnetic heading is known as compass deviation.

AMI Maritime provides magnetic compass calibration in Singapore to support reliable compass performance on commercial vessels. Calibration and adjustment help identify deviation and address errors affecting compass readings.

Magnetic Compass Adjustment and Deviation Card

Magnetic compass adjustment helps reduce deviation and improve the reliability of compass readings. The process involves inspecting the compass, checking its readings on different headings and making appropriate corrections.

Depending on the service requirements, magnetic compass adjustment may involve:

  • Compass inspection, including the bowl, liquid, card and binnacle
  • Compass swing and deviation measurement
  • Compass correction using the appropriate correctors
  • Recording of residual deviation
  • Magnetic compass repair and servicing, where required
  • Preparation or updating of the compass deviation record, where included in the service

A compass deviation card records the remaining deviation on different vessel headings. It is kept on the bridge as a reference for officers when correcting magnetic compass readings.

Accurate deviation records help bridge personnel understand the compass's remaining errors and use the instrument more effectively during navigation.

When to Calibrate or Adjust a Compass

A magnetic compass should be checked according to the vessel's maintenance requirements and applicable flag administration rules. Additional checks or adjustment may be necessary after changes that can affect the vessel's magnetic characteristics.

Common reasons for compass inspection or adjustment include:

  • At intervals required by applicable regulations or the vessel's safety management system
  • After dry-docking, major repairs or structural modifications
  • After significant steelwork or changes to equipment near the compass
  • Following the installation or removal of electrical or magnetic equipment near the compass
  • When compass readings show unexpected deviation
  • When the magnetic compass and gyrocompass headings do not agree as expected

Vessel operators should follow the applicable flag administration requirements and manufacturer guidance when determining the need for compass adjustment.

How a Compass Service Works

The service process depends on whether the vessel requires gyrocompass servicing or magnetic compass adjustment.

Gyrocompass Service

  • Request: The vessel operator provides the vessel name, gyrocompass make and model, reported issue and port.
  • Inspection: The equipment and its relevant connections are inspected.
  • Fault Finding: The cause of the problem is investigated.
  • Servicing or Repair: The required maintenance or repair work is carried out according to the equipment condition.
  • Testing: The system is tested to check its operation after the service.

Magnetic Compass Adjustment

  • Request: The vessel operator provides the vessel details, compass information and service location.
  • Inspection: The compass, bowl and binnacle are checked.
  • Compass Swing: Compass readings are checked on different headings to measure deviation.
  • Adjustment: Appropriate corrections are made to reduce compass deviation.
  • Records: The remaining deviation is recorded and the relevant compass documentation is prepared where included in the service.

Why Compass Accuracy Matters

Reliable heading information is important for bridge operations and vessel navigation. Errors in heading data can affect course monitoring, connected navigation equipment and automatic steering, depending on the vessel's system configuration.

SOLAS Chapter V, Regulation 19 sets out requirements for shipborne navigational equipment, including magnetic compass and gyrocompass equipment for applicable vessels. The relevant provisions also address magnetic compass adjustment and the recording of residual deviation.

Regular inspection, servicing and appropriate compass adjustment help vessel operators maintain their navigation equipment in accordance with applicable requirements.

Why Choose AMI Maritime as Your Gyrocompass and Compass Service Provider in Singapore

AMI Maritime Pte Ltd is a Singapore-based marine technology and equipment services company serving as the Far East Regional Centre of AMI Marine (UK) Ltd.

We support shipowners, ship managers and vessel operators with marine navigation and communication equipment services.

Reasons to contact AMI Maritime include:

  • Singapore Base: Located at 169 Kaki Bukit Avenue 1, Singapore, supporting marine customers in the region.
  • Manufacturer Connection: Far East Regional Centre of AMI Marine (UK) Ltd.
  • Bridge Data Experience: Knowledge of marine data interfacing and the connections between VDR, navigation and other bridge systems.
  • Marine Equipment Support: Services covering equipment repair, installation, inspection, servicing and performance testing.
  • Marine Industry Experience: Support for commercial shipping and vessel operators.

Frequently Asked Questions

What does a gyrocompass overhaul include?

It includes inspection, component checks, replacement of worn parts if needed, and heading accuracy testing.

How often should a gyrocompass be overhauled?

The service interval depends on the manufacturer's recommendations, equipment model and operating condition. Vessel operators should follow the applicable maintenance schedule and equipment manual.

Does AMI Maritime repair gyro repeaters?

AMI Maritime provides marine navigation equipment services. Contact our team with your gyro repeater's make and model to confirm the available repair and servicing support.

What is magnetic compass calibration?

Magnetic compass calibration involves checking compass readings and identifying deviation. Adjustment may then be carried out to reduce the remaining error and improve compass accuracy.

What is a compass deviation card?

A compass deviation card records the remaining error of a magnetic compass on different vessel headings. It is kept on the bridge to help officers correct compass readings when required.

When does a ship need a magnetic compass adjustment?

After dry-docking, structural work, nearby equipment changes, or unexpected compass deviation.