KW810
Designed and manufactured by AMI Marine (UK), KW810 BNWAS conforms with the requirements of the MSC Resolution.
Introduction
Designed and manufactured by AMI Marine (UK), KW810 BNWAS conforms with the requirements of the MSC Resolution 128(75) on Performance Standards adopted by the IMO, which made it a mandatory equipment to be fitted on all types of vessels as per implementation deadlines listed below, and should remain operational at all times whilst the vessel is at sea.
Main Features
- Fully automated
- Touch screen
- User-friendly
- Easy to install
- Adaptable with other equipment
- Modern sleek look
- Competitive price
- UK manufactured with worldwide support
Unique Features
- KW810 BNWAS is UK Type Approved.
- KW810 BNWAS automatically monitors bridge activity via a motion sensor and is the only one of its kind to trigger an alarm on a FOUR-STAGE BASIS: Local (Officer on Watch bridge), Remote (Captain's cabin), General (ship borne alarm), SSAS (ship's operator).
- KW810 BNWAS is the only alarm system which incorporates TWO OPERATIONAL MODES – Manual, i.e. requiring the Officer on Watch (OOW) to press a button at a preset interval, and Autosensoring, i.e. detecting movements of the OOW on the bridge. In both cases the KW810 will send an alarm should the requirements be not fulfilled.
Specifications
KW810-MEU
- Power: 110/230 V AC
- Input 1: NMEA0183 GPS Speed $GPVTG
- Input 2: NMEA0183
- Autopilot or Autopilot Engaged
- Output: NMEA0183 for VDR
- Other Outputs: 3 × Dry Contacts for: – 3rd Stage Active Watch Alarm for General Ship Alarm – 4th Stage for activating SSAS Distress system – System faults
- Dimensions: Mild steel enclosure 300 × 300 × 155 mm IP57
MAIN ALERT PANEL (MAP)
- Power: 12 V DC supplied from MEU
- Input: All Alert stages and Audible Alarm
- Dimensions: ABS Moulded plastic 135 × 185 × 85 mm IP65
REMOTE ALERT PANEL (RAP)
- Power: 12 V DC supplied from MEU
- Input: Bridge Alert stages and Audible Alarm
- Dimensions: ABS Moulded plastic 120 × 90 × 50 mm IP65
WATCH ALERT PANEL (WAP) FOR BOTH 2ND & 3RD STAGE ALERTS
- Power: 12 V DC supplied from MEU
- Input: Watch Alert and Audible Alarm
- Dimensions: ABS Moulded plastic 120 × 90 × 50 mm IP65
MOTION DETECTOR (PIR)
- Power: 12 V DC supplied from MEU
Unacknowledged Alarm Transfer Unit – KW909FM (Option)
Can be added to KW810 BNWAS to extend the capability
of handling the unacknowledged bridge alarms.
Input: 5 × NMEA 0183, ch1 dedicated to GPS
3 × Contact Closures
Output: NMEA 0183 data to MEU
Power: 10 to 32 V DC at 100 mA
EQUIPMENT LIST
Standard Supply
- Main Electronic Unit KW810 × 1
- Main Alert Panel KW810M × 1
- Remote Alert Panel KW810R × 1
- Watch Alert Panel KW810W × 1
Optional Supply
- Remote Alert Panel KW810R
- Watch Alert Panel KW810W
- Motion Detector KW810P
- Bridge Alarm Interface KW909FM
