KW 941 – NMEA Stepper Retransmission Unit
The KW941 interface converts serial
heading data into traditional step
transmission, and also acts as a stepper
amplifier.
Inputs : |
Standard stepper 6 steps per degree. 3 to 70 volts + or – ve common.
|
Inputs : |
NMEA 0183. $HEHDT, $GPHDT and all valid heading sentences
or Furuno AD10 format serial data and clock. (DIP switch selectable) |
Outputs : |
Stepper, 6 steps per degree. 6 output ports. Output voltage nominal 24, 35, 50 and 70 volts DC (1A per port). Negative step voltage, positive common. The model KW941-BP outputs either polarity.
|
Please specify your voltage requirements when ordering.
Outputs : | $HEHDT output, following the NMEA 0183 or Furuno input only. Outputs :- Alarm relay. |
1 Amp DIL relay. | |
Connectors: | Lift off terminal blocks. Power is orange snap-in connector. |
Power: | 115/230 volts 50/60 Hz. Double fused, switched and filtered. |
Housing: | Enclosure with door 350 x 250 x 150 mm. |
Features: | LEDs on all inputs and outputs. Simple design. Watchdog restart circuit. All connections removable terminal blocks. |